​​​​​​​True Online Double Conversion
RACK AND TOWER DESIGN
Digital display LCD & LED
Wide input voltage range and frequency tolerance
Power factor 0.9
3 phase In, 1 phase Out
Multi-protections such as overload, short-circuit, over-temperature, battery under voltage, battery overcharge
Transfer time 0 ms
Crest factor 3:1
Pure sine wave output
Automatic restart
Battery cold start function
Maintenance sealed lead acid battery
Advance Battery Management
Back up 15-30 mins (depend on loads)
Parallel redundancy
Extension battery (Optional)
Hardwired Terminal
Software monitoring
SNMP card (optional)
TISI standards 1291-2553(1),TISI standards 1291-2553(2), TISI standards 1291-2555(3),  ISO 9001, ISO 14001, CE, EN, FCC, RoHS
Onsite Service & PM  (According to company policy) 

2 Years Warranty
Free Onsite Service at Bangkok Metropolitan Region *Conditions are as specified by the company
Pick-up and delivery of the repair product for free with express delivery.
Service Center has ISO 9001:2015


ZIRCON
The Smart Power Solution ✨

​​​​​​​

 ZC-RT 10KVA/9KW

Input	Phase Rated Voltage Voltage Range Frequency Range Power Factor Current THDi Current THDi Bypass Voltage Range Bypass Voltage Range Bypass Voltage Range Bypass Voltage Range FCO Range Generator Input	1Phase 2 Wires + Ground or3 phase 4 wires+ ground 380/400/415VAC or 220/230/240VAC 208-478Vc or 120vac-276vac 45Hz-55Hz / 55Hz-66Hz >0.99 <3% at (100% linear load ) <5% at (100% non- linear load ) 220VAC Max : voltage; 10%, 15%, 20% or 25% default : 25% 230VAC Max : voltage; 10%, 15%, 25% default : 20% 240VAC Max : voltage; 10%, or 15% default : 15% Min:20%,30%,or45%, default : 45% Same as the bypass Support
Output	Phase Rated Voltage Power Factor ​Voltage Regulation Frequency - Utility Mode Frequency  - Battery Mode Crest Factor THD THD Wave Form	1Phase 2 Wires + Ground Dd 22/230/240VAC 0.9 ​+/- 1% ±1%, ±2%, ±4%, ±5%, ±10% of the Frequency (optianal) (50Hz ±1%) Hz 3:1 < 2% with Linear Load < 5% with non  Linear Load Pure Sine Wave
Battery	Voltage Backup Time Backup Time Recharge Time to 90% Charging Current Battery Socket	Standard 192Vdc; Optional voltage: 216/240 Vdc Full load ≥ 2 min(Standard) Long time unit depends on the capacity of external batteries Estimated remaining time display on LCD 3 Hours(90% after fully discharged) Maximum Current 10A; charge current can be set according to battery capacity installed. Anderson Like PowerPole Modular Connectors
Transfer Time		Utility to Battery; 0ms, Utility to Bypass <4ms
Protection​	Overload   - AC Mode Overload   - Batt. Mode Overload   - Bypass Mode Short Circuit Overheat Battery Low Self-Diagnostics EPO Battery Noise Suppression	105%~1H, 110%~125% : 10mins, 125%~150% : 1 min, ≥150% : 200ms < then tranfer to bypass 105%~1H, 110%~125% : 10mins, 125%~150% : 1 min, ≥150% : 200ms < then  shutdown UPS completely 60A(Input Breaker) Hold Whole System Line mode; Switch to Bypass; Backup Mode Mode, shutdown UPS immediately Alarm and Switch off Upon Power On and Software Control Shutdown UPS immediately Advanced Battery Management Complies with EN60664-1
Alarm	Audible & Visual	Line Failure, Battery Low, Overload, System Fault
Display	Status LED & LCD Reading on the LCD	Line Mode, Backup Mode, Eco Mode, Bypass Mode, Battery Low, Battery bad, Overload & UPS Fault Input Voltage, Input Frequency,Output Voltage, Output Frequency, Load percentage, Battery Voltage, Inner Temperature & Remaining Battery Backup Time
Physical	Input Connection Output Connection External Battery Connection	Hardwire Hardwire & IEC320c13-10Ax2 Anderson like PowerPole Modular connectors
Communication Interface		USB , dry contract  ,parellel , communication solt
Environment	​​Operating Temperature Storage Temperature Humidity Altitude Noise	0 °C - 40 ° C 25°C ~ + 55°C 0-95% non-condensing <1500 m. (derating while > 1500m) <55 dB (at 1 meter)
Safety Conformance		Complies with EN60664-1

All specifications subject to change without notice. 
​​​​​​Custom-made specifications are acceptable.
​​​​​​​
​​​​​​​​​​​​​​

​​​​​​​